Product Description
ZINC SPRAY is a high solid, zinc-rich coating that forms an electrolytic bond on metal surfaces and prevents the formation of rust and corrosion. Prevents further damage and stops creepage in areas where rusting has already occurred. It provides a cold applied coating which equals the performance of hot-dip galvanize treatments. Resists abrasion and large temperature fluctuations.
Features and Benefits
- Stops Rust and Corrosion
- 68% Zinc after Drying
- Use on Iron and Steel
- Prevents Further Damage and Stops Creepage in Rusting Areas
Directions:
- Shake can vigorously before and during use.
- Shake can vigorously until the agitator ball begins to rattle. Continue shaking for at least one minute after to ensure that all the zinc is in suspension.
- The surface must be free from all loose rust, oil, grease, and old paint.
- Spray with a sweeping motion holding can no closer than 10 inches from surface. The coating should be touch dry in 15 minutes.
- May be painted over after allowing approximately six hours to dry. Cures in 24 to 48 hours. Several thin coats are better than one heavy coat.
- To prevent clogging, after each use, invert can and spray a few short bursts to clear valve.
DANGERS & PRECAUTIONS:
Read and understand the product’s label and Safety Data Sheet. Extremely flammable aerosol. Contains gas under pressure: May explode if heated. It causes skin and serious eye irritation. May cause drowsiness and dizziness. May be fatal if swallowed and enters airways. Sensitive to static charge. Keep out of reach of children. Keep away from sparks, open flames, and hot surfaces. No smoking. Do not spray on an open flame or other ignition sources. Use only outdoors or in a well-ventilated area. Wear safety glasses and chemical resistant gloves when using the product. Wash hands thoroughly after handling. Do not breathe vapors. Do not eat, drink, or smoke while using the product.
Equivalent Part Numbers: ZS1
