Product Description
XPRESS INJECT GUN & STARTER KIT – Vapco’s Xpress Inject Gun and Starter Kit provide the easiest, quickest and most innovative method for injecting air conditioning and refrigeration leak sealers, dyes, and system enhancers into a system.
XPRESS SEAL DIRECT INJECT GUN is an easy and quick solution for injecting air conditioning and refrigeration leak sealers, dyes, and system enhancers into a system.
Features and Benefits
- No need to pump down the system.
- Manifold gauges aren’t needed.
- No injection hose or caulk gun needed.
- 12+ injections per CO2 cartridge.
Instructions
Turn the A/C system on and verify the unit is running. With the CO2 cartridge in the gun, connect the Seal product to the Inject Gun. Then, connect the other end to the low-side service port. Briefly pull the trigger. The direct Inject Gun will meter just enough of the CO2 to the empty tube. The Xpress Seal product has now been injected into the system. Disconnect the empty tube from the low-side port, and install the service port cap. Run the A/C unit at least one hour after installing a Vapco Xpress Seal product.
Equivalent Part Numbers: XPSINJ
